# xorbits.numpy.quantile#

xorbits.numpy.quantile(a, q, axis=None, out=None, overwrite_input=False, interpolation='linear', keepdims=False, **kw)[source]#

Compute the q-th quantile of the data along the specified axis.

New in version 1.15.0(numpy).

Parameters
• a (array_like of real numbers) – Input array or object that can be converted to an array.

• q (array_like of float) – Probability or sequence of probabilities for the quantiles to compute. Values must be between 0 and 1 inclusive.

• axis ({int, tuple of int, None}, optional) – Axis or axes along which the quantiles are computed. The default is to compute the quantile(s) along a flattened version of the array.

• out (ndarray, optional) – Alternative output array in which to place the result. It must have the same shape and buffer length as the expected output, but the type (of the output) will be cast if necessary.

• overwrite_input (bool, optional) – If True, then allow the input array a to be modified by intermediate calculations, to save memory. In this case, the contents of the input a after this function completes is undefined.

• method (str, optional (Not supported yet)) –

This parameter specifies the method to use for estimating the quantile. There are many different methods, some unique to NumPy. See the notes for explanation. The options sorted by their R type as summarized in the H&F paper 1 are:

1. ’inverted_cdf’

2. ’averaged_inverted_cdf’

3. ’closest_observation’

4. ’interpolated_inverted_cdf’

5. ’hazen’

6. ’weibull’

7. ’linear’ (default)

8. ’median_unbiased’

9. ’normal_unbiased’

The first three methods are discontinuous. NumPy further defines the following discontinuous variations of the default ‘linear’ (7.) option:

• ’lower’

• ’higher’,

• ’midpoint’

• ’nearest’

Changed in version 1.22.0(numpy): This argument was previously called “interpolation” and only offered the “linear” default and last four options.

• keepdims (bool, optional) – If this is set to True, the axes which are reduced are left in the result as dimensions with size one. With this option, the result will broadcast correctly against the original array a.

• interpolation (str, optional) –

Deprecated name for the method keyword argument.

Deprecated since version 1.22.0(numpy).

Returns

quantile – If q is a single probability and axis=None, then the result is a scalar. If multiple probabilies levels are given, first axis of the result corresponds to the quantiles. The other axes are the axes that remain after the reduction of a. If the input contains integers or floats smaller than float64, the output data-type is float64. Otherwise, the output data-type is the same as that of the input. If out is specified, that array is returned instead.

Return type

scalar or ndarray

mean

percentile

equivalent to quantile, but with q in the range [0, 100].

median

equivalent to quantile(..., 0.5)

nanquantile

Notes

Given a vector V of length n, the q-th quantile of V is the value q of the way from the minimum to the maximum in a sorted copy of V. The values and distances of the two nearest neighbors as well as the method parameter will determine the quantile if the normalized ranking does not match the location of q exactly. This function is the same as the median if q=0.5, the same as the minimum if q=0.0 and the same as the maximum if q=1.0.

The optional method parameter specifies the method to use when the desired quantile lies between two indexes i and j = i + 1. In that case, we first determine i + g, a virtual index that lies between i and j, where i is the floor and g is the fractional part of the index. The final result is, then, an interpolation of a[i] and a[j] based on g. During the computation of g, i and j are modified using correction constants alpha and beta whose choices depend on the method used. Finally, note that since Python uses 0-based indexing, the code subtracts another 1 from the index internally.

The following formula determines the virtual index i + g, the location of the quantile in the sorted sample:

$i + g = q * ( n - alpha - beta + 1 ) + alpha$

The different methods then work as follows

inverted_cdf:

method 1 of H&F 1. This method gives discontinuous results:

• if g > 0 ; then take j

• if g = 0 ; then take i

averaged_inverted_cdf:

method 2 of H&F 1. This method gives discontinuous results:

• if g > 0 ; then take j

• if g = 0 ; then average between bounds

closest_observation:

method 3 of H&F 1. This method gives discontinuous results:

• if g > 0 ; then take j

• if g = 0 and index is odd ; then take j

• if g = 0 and index is even ; then take i

interpolated_inverted_cdf:

method 4 of H&F 1. This method gives continuous results using:

• alpha = 0

• beta = 1

hazen:

method 5 of H&F 1. This method gives continuous results using:

• alpha = 1/2

• beta = 1/2

weibull:

method 6 of H&F 1. This method gives continuous results using:

• alpha = 0

• beta = 0

linear:

method 7 of H&F 1. This method gives continuous results using:

• alpha = 1

• beta = 1

median_unbiased:

method 8 of H&F 1. This method is probably the best method if the sample distribution function is unknown (see reference). This method gives continuous results using:

• alpha = 1/3

• beta = 1/3

normal_unbiased:

method 9 of H&F 1. This method is probably the best method if the sample distribution function is known to be normal. This method gives continuous results using:

• alpha = 3/8

• beta = 3/8

lower:

NumPy method kept for backwards compatibility. Takes i as the interpolation point.

higher:

NumPy method kept for backwards compatibility. Takes j as the interpolation point.

nearest:

NumPy method kept for backwards compatibility. Takes i or j, whichever is nearest.

midpoint:

NumPy method kept for backwards compatibility. Uses (i + j) / 2.

Examples

>>> a = np.array([[10, 7, 4], [3, 2, 1]])
>>> a
array([[10,  7,  4],
[ 3,  2,  1]])
>>> np.quantile(a, 0.5)
3.5
>>> np.quantile(a, 0.5, axis=0)
array([6.5, 4.5, 2.5])
>>> np.quantile(a, 0.5, axis=1)
array([7.,  2.])
>>> np.quantile(a, 0.5, axis=1, keepdims=True)
array([[7.],
[2.]])
>>> m = np.quantile(a, 0.5, axis=0)
>>> out = np.zeros_like(m)
>>> np.quantile(a, 0.5, axis=0, out=out)
array([6.5, 4.5, 2.5])
>>> m
array([6.5, 4.5, 2.5])
>>> b = a.copy()
>>> np.quantile(b, 0.5, axis=1, overwrite_input=True)
array([7.,  2.])
>>> assert not np.all(a == b)